In the production workshops that everyone generally sees, the sanitary environment is not particularly good. As a bridge crane that is often used in workshops, the degree of contamination can be imagined. The longer the time is, the easier it is to issue a safety accident. In this case, the enterprise unit will Need to do the cleaning of parts, but many companies do not know how to wash. Today Nucleon crane engineer will talk about this question.
First of all, when cleaning the oil of suspension overhead crane parts, you can use the weapon to scrape off the oil impurities that cannot be wiped off. Then use warm water to inhale the parts, pour down the laundry liquid and use a brush to clean it, then rinse it with clean water and dry it. Aluminum alloy parts can not use strong alkaline detergent.
Secondly, when the cleaning machine deposits carbon, it can be brushed off with a steel brush and can be scraped off with a spatula under severe conditions. However, this is not the best way. If the conditions permit, the carbon deposit on the part can be softened by using a carbonization agent and cleaned with a brush.
Finally, when the suspension overhead crane scale is cleared, the contrast is simple and it is possible to remove scale with a hydrochloric acid solution or a carbonic acid descaling agent.
For the same conditions, some eot crane companies have problems in useless years, and some companies have used it for many years without problems. Why? The reason is that lifting equipment also requires daily maintenance and maintenance of the enterprise. Therefore, it is important to do well the cleaning work for your suspension overhead crane.
